Mobility Solutions

Fourth-generation long-range radar Bosch presents new radar sensor Basis for high-performance automotive systems

  • Wider aperture allows faster reaction when cars cut in front
  • Height now also measured for improved emergency-brake function
  • Standardized manufacturing processes reduce manufacturing cost
Add to my press materials
Save text
  • August 13, 2013
  • Mobility Solutions
  • Press releases
  • Images: 1

press release

Many high-performance assistance systems use a radar sensor to map the vehicle’s surroundings. The advantage of these sensors is that they can measure extremely accurately the distance and speed of vehicles on the road ahead. Bosch has now developed a new long-range radar sensor. Like its predecessors, it uses the 77-gigahertz frequency bandwidth. It is also even more powerful, compact, and cost-effective than its direct predecessor. “The new radar sensor can detect obstacles and vehicles cutting in even faster,” says Gerhard Steiger, president of the Chassis Systems Control division. “This means that safety functions such as automatic emergency braking can be triggered earlier.” The fourth generation of Bosch long-range radar sensors, or LRR4 for short, goes into series production in 2014.

Wider aperture provides more information about surroundings
The most important technical novelty in the new LRR4 is the number of radar beams used. As in the predecessor model, four generate a bundled beam to the front. They can detect other vehicles at a distance of roughly 250 meters. This allows the ACC adaptive cruise control to be used at speeds of more than 160 kph, and the ACC can make up for large differences in speed without any intervention by the driver. Two additional radar beams extend the aperture to 40 degrees – ten degrees more than the predecessor. This means vehicles cutting in can be detected even earlier, and the ACC can react faster. For even more information, there is also an elevation beam. In concert with the six basic beams, it can estimate the height of the objects detected, which helps to classify them better. The advantage for drivers is that critical situations, especially in urban traffic, are detected and clearly identified earlier. Automatic emergency braking can be triggered earlier, meaning that accidents can be averted altogether or their severity mitigated. Maximum performance comes from the use of two radar sensors installed one on each side of the front of the vehicle. Together, they offer an even wider aperture. As they are not installed dead center, they can detect vehicles cutting in even quicker.

LRR4 integrates comprehensive sensor data fusion
Powerful assistance systems frequently rely on more than one sensor. Like its predecessor, the LRR4 can use its own control unit to process the data from a second, optional radar sensor, from a video camera, and from ultrasound sensors. With the help of powerful software algorithms, this “sensor data fusion” can give rise to a highly detailed “image” – or more precisely, an interpretation of the vehicle’s surroundings. By this, it also detects pedestrians and includes them in its evaluation of the situation, which can help further improve functions such as automatic emergency braking. From 2016, this pedestrian protection will be one of the requirements of the safety tests carried out by the consumer protection organization Euro NCAP. The benefit of such systems has already been proved by the euroFOT field study, initiated by the European Union. Published in 2012, it found that an ACC in combination with a collision warning system can have a positive effect on more than five percent of all freeway accidents involving injury, or even avert them altogether.

Like its predecessor, the LRR4 does not have any moving parts. This makes it especially robust, and suitable for all types of passenger car. And with optional lens heating, this function is practically always available, even in ice and snow. The high-frequency module makes use of silicon-germanium technology.

The manufacturing process also features an innovation: all components can now be manufactured using standard soldering processes. This further reduces manufacturing cost. “With its many innovations, Bosch has made radar sensors more powerful and cost-effective,” Steiger says. “Radar technology is ready for the mass market.” This is underscored by the planned manufacturing volumes at Bosch. From start of series production in 2000, it took until early 2013 to manufacture the first million. The second million, by contrast, will roll off the production lines in 2014, and the ten-millionth sensor is scheduled to follow just two years later.

As an alternative to long-range radar sensors, Bosch has been offering mid-range radar sensors since mid-2013. These are even more cost-effective, with a shorter range of 160 meters. They allow automatic emergency braking and adaptive cruise control at speeds of up to 160 kph, which is sufficient for most countries. A variant for use at the rear of the vehicle will be launched in 2014. At an early stage, this sensor detects vehicles approaching fast from the rear, and can warn of a collision when changing lanes. With an aperture of 150 degrees, it covers an especially wide field of view.

Click here to find further information.

At the 65th International Motor Show in Frankfurt, Bosch is showcasing technical solutions for connected mobility. A variety of innovations are helping to make road traffic cleaner and more efficient, as well as safer and more comfortable. Bosch is exhibiting its highlights at booth A04 in hall 8.

Mobility Solutions is the largest Bosch Group business sector. In 2015, its sales came to 41.7 billion euros, or 59 percent of total group sales. This makes the Bosch Group one of the leading automotive suppliers. The Mobility Solutions business sector combines the group’s expertise in three mobility domains – automation, electrification, and connectivity – and offers its customers integrated mobility solutions. Its main areas of activity are injection technology and powertrain peripherals for internal-combustion engines, diverse solutions for powertrain electrification, vehicle safety systems, driver-assistance and automated functions, technology for user-friendly infotainment as well as vehicle-to-vehicle and vehicle-to-infrastructure communication, repair-shop concepts, and technology and services for the automotive aftermarket. Bosch is synonymous with important automotive innovations, such as electronic engine management, the ESP anti-skid system, and common-rail diesel technology.

The Bosch Group is a leading global supplier of technology and services. It employs roughly 375,000 associates worldwide (as of December 31, 2015). The company generated sales of 70.6 billion euros in 2015. Its operations are divided into four business sectors: Mobility Solutions, Industrial Technology, Consumer Goods, and Energy and Building Technology. The Bosch Group comprises Robert Bosch GmbH and its roughly 440 subsidiaries and regional companies in some 60 countries. Including sales and service partners, Bosch’s global manufacturing and sales network covers some 150 countries. The basis for the company’s future growth is its innovative strength. Bosch employs 55,800 associates in research and development at 118 locations across the globe. The Bosch Group’s strategic objective is to deliver innovations for a connected life. Bosch improves quality of life worldwide with products and services that are innovative and spark enthusiasm. In short, Bosch creates technology that is “Invented for life.”

Further information is available online at and,

PI8268 - August 13, 2013

Your contact person for journalists

Stephan Kraus

+49 711 811-6286 Send Email

Share this information