With funding from the German Federal Ministry of Education and Research: Conductive lubricants will protect the electric motors of the future Basic and industrial researchers are developing new greases

  • Progress on the road to sustainable e-mobility
  • Ionic liquids already effective
  • Very promising research findings
Add to my press materials
Save text
  • June 11, 2014
  • Business/economy
  • Press releases
  • Images: 2

press release

     The vehicles of the future will require higher voltages than current models.
     New electrically conductive lubricants will help protect electric motors and alternators
     from wear. Thanks to the joint efforts of basic and industrial researchers in Germany,
     the new substances required to achieve this have already been developed.

Stuttgart – In the future, electrically conductive lubricants will protect electric motors from the surface damage that can result from electrical discharging in the bearings. With these findings, which are the result of a joint research project, a group of German basic and industrial engineers have taken an important step toward achieving the sustainable electromobility of the future. The project is funded by the German Federal Ministry for Education and Research.

The initiative was launched to prepare for the vehicles of the future, which will require higher voltages than current models. At present, 12 volts are required to provide all automotive electric systems – from lights and radios to air conditioners – with sufficient power. Within the next few years, the figure is expected to rise to 48 volts, as electric power is required for a growing number of functions. The voltage levels of electric and hybrid vehicles are even higher: these vehicles can require as much as 400 volts.

Stronger alternating electric fields
“In alternators and electric motors, higher volage levels mean that alternating electric fields are stronger than they once were,” says Dr. Gerd Dornhöfer, one of the Bosch associates taking part in the “SchmiRmaL” project (Switchable intelligent tribological systems with minimal friction losses and maximum lifespan). This can cause, for instance, electrical discharge in the ball bearings of motors and alternators. When this occurs, sparks may fly that can melt tiny areas of the metal’s surface. This, in turn, leads to uneven raceways. As a result of this, the ball bearings first begin to make noise, and then to malfunction too soon. “We can already prevent this from happening reliably with the lubricants we have developed,” says Dornhöfer as he looks at the measurement results on his computer. The chief expert for lubrication technology works for the corporate research department in Gerlingen, close to Stuttgart.

Anyone who has ever gotten a small electric shock from a doorknob is familiar with static charges. When the finger is just a few millimeters from the doorknob, an electric spark jumps between the two. The higher the electric tension, the further the spark travels. The air between the door handle and the finger acts as an insulator until the finger is close enough to the knob.

Lubricant film acts as an insulator
The same thing can also happen when a current is generated between the shaft and housing of an electric motor, as the lubricant coating in the bearing acts as an insulator. As rotation speed increases, the lubricant greases in the ball bearings separate the bearings from the raceway. This is comparable to hydroplaning on wet roads. Unlike on roads, however, this phenomenon is desirable in ball bearings, as it minimizes the friction generated by the bearings as well as the surface damage. However, this can also lead the bearings to recharge when the lubricant film is intact, similar to a capacitor. When the built-up voltage is sufficient, it can penetrate the insulating lubricant grease. This energy suffices to briefly melt a tiny area of metal on the bearing’s surface. If this happens repeatedly, tiny imperfections eventually appear on the bearing. “We want to prevent this at all costs, as it can result in greater damage to these spots over time,” says the Bosch scientist. Engineers refer to this as electrical pitting. The process results in damaged areas on the raceway that are comparable to potholes. In the future, the energy of these discharges may become greater as the power density and voltages of automotive electric systems increase.

In light of this potential problem, the SchmiRmal project’s strategy focuses on developing new lubricants, whose substances remain conductive even at higher voltage levels. As a result, these lubricants do not act as insulators to begin with. Voltage levels no longer build up, nor does potentially destructive electrostatic discharge.

“This can be achieved in several ways,” said Dornhöfer. “One could, for instance, add fine metal particles to the grease to conduct the current. But this would mean that the lubricant grease would also act as an abrasive, and of course we want to avoid this.” Here, ionic fluids are more suitable. In chemical terms, these comprise molecules known as ions that conduct an electrical charge. “Ionic fluids conduct electricity, and this is why we add these substances to our lubricants,” said Dornhöfer.

Resistance reduced by a factor of ten million
Following countless tests, the scientists have now come up with greases that are less and less resistant to electricity. In other words: the lubricant conducts electrons as desired in the ball bearing and thus prevents the dreaded electrical flashovers. The initial material was a commercially available industrial lubricant. “By using the right ionic fluids combined with conductive carbon, its resistance can be reduced by a factor of ten million,” says the Bosch scientist. This is enough to prevent the unwanted electrical discharges.

While the new grease is black, it otherwise largely resembles its predecessor. At present, Dornhöfer is focusing in part on investigating all of the grease’s characteristics. To ensure a long life cycle, ball bearings must be heat resistant and have cold flow properties. Moreover, the new additives should not compromise the grease’s corrosion protection properties. And it goes without saying that the new grease should not pose a hazard to human health or the environment. All of this is currently being tested as part of the BMBF project. “So far, our findings have been very promising”, Dornhöfer says.

Many scientists from a broad range of disciplines and sectors have contributed to this success. “No one can find these solutions alone. We are all contributing and learning from one another,” Dornhöfer says. The project is set to run until April 2015. “Chances are high that the new lubricants will find industrial application after the project.”

A longer service life for many machine components
The benefits of the project’s work go well beyond applications for electric motors. The new lubricants can also increase the service life and reliability of machine elements that experience high levels of strain, especially roller and plain bearings and transmission components. Moreover, performance can be improved for motors of the same size, or maintained if motors are smaller. At the same time, the lubricants contribute to reducing energy consumption and to increasing efficiency.

The project participants
Klüber Lubrication SE & Co. KG (Munich) is one of the world’s leading and most innovative specialty lubricant manufacturers. IoLiTec-Ionic Liquids Technologies GmbH (Heilbronn) develops ionic fluids. Schaeffler Technologies GmbH & Co. KG (Herzogenaurach) is an automotive supplier that develops and manufactures rolling bearings. The company’s role in the project is to assess how new types of oil can improve the service life of bearings. Inprotec AG (Heitersheim) develops highly effective coatings that protect against abrasion. Over the course of the project, SCHUNK GmbH & Co. KG (Lauffen/Neckar) is working on improving the durability of a valve. Using computer models, the Fraunhofer Institute for Algorithms and Scientific Computing SCAI (Sankt Augustin) is making forecasts about the potential environmental impact of new ionic fluids. Over the course of the project, the Fraunhofer Institute for Mechanics of Materials IWM (Freiburg im Breisgau) is focusing mainly on the potential lubricating effect of ionic fluids. Bosch is applying these new lubricants and testing their suitability under real-world conditions.

Klüber Lubrication München SE & Co. KG:
IoLiTec-Ionic Liquids Technologies GmbH:
Schaeffler Technologies GmbH & Co. KG:
inprotec AG:
Fraunhofer Institute for Algorithms and Scientific Computing SCA
Fraunhofer Institute for Mechanics of Materials IWM

The Bosch Group is a leading global supplier of technology and services. It employs roughly 375,000 associates worldwide (as of December 31, 2015). The company generated sales of 70.6 billion euros in 2015. Its operations are divided into four business sectors: Mobility Solutions, Industrial Technology, Consumer Goods, and Energy and Building Technology. The Bosch Group comprises Robert Bosch GmbH and its roughly 440 subsidiaries and regional companies in some 60 countries. Including sales and service partners, Bosch’s global manufacturing and sales network covers some 150 countries. The basis for the company’s future growth is its innovative strength. Bosch employs 55,800 associates in research and development at 118 locations across the globe. The Bosch Group’s strategic objective is to deliver innovations for a connected life. Bosch improves quality of life worldwide with products and services that are innovative and spark enthusiasm. In short, Bosch creates technology that is “Invented for life.”

The company was set up in Stuttgart in 1886 by Robert Bosch (1861-1942) as “Workshop for Precision Mechanics and Electrical Engineering.” The special ownership structure of Robert Bosch GmbH guarantees the entrepreneurial freedom of the Bosch Group, making it possible for the company to plan over the long term and to undertake significant up-front investments in the safeguarding of its future. Ninety-two percent of the share capital of Robert Bosch GmbH is held by Robert Bosch Stiftung GmbH, a charitable foundation. The majority of voting rights are held by Robert Bosch Industrietreuhand KG, an industrial trust. The entrepreneurial ownership functions are carried out by the trust. The remaining shares are held by the Bosch family and by Robert Bosch GmbH.

Additional information is available online at and,

PI8577 - June 11, 2014

Your contact person for journalists

Thilo Resenhoeft

+49 711 811-7088 Send Email

Share this information